Canon is a Japanese imaging and optical device manufacturing company. This industry is best known for manufacturing high-quality DSLR cameras. Along with cameras and medical imaging devices, Canon is also known for printers. Canon manufactures various types of printers for businesses and home use. While using the Canon printer, few users faced Canon B200 error MX922. When the error appears, the Canon printer immediately stops working.
Possible Reasons behind Canon B200 error:
- Ink gets dried up
- The waste tank is full
- Outdated Canon printer driver
- Error on your ink cartridge
- Empty ink cartridge
- Overheated printhead
- The printer fuser gets damaged
Best solutions for troubleshooting canon mx922 error b200:
Try a power reset
Your Canon printer can sometimes get into the error due to any runtime error. Simple runtime errors can easily be fixed by restarting your device. While the Canon printer is turned on, take out the USB cable and power cord. Now shut down your computer for a minute. Restart the PC and plug in the power cord to the printer.
The Canon printer will start automatically. Now connect the USB cable to the printer and give a print command from your PC. Check for the B200 error code on your Canon printer.
Check the ink cartridge
The user can get into the error when he has installed a third-party cartridge on the printer. Third-party cartridges are cheap but can harm your printer. Sometimes these can’t fit inside the printer properly and get the printer into an error. Open the access door of your Canon printer and take out the ink cartridge.
Check for all the contact pins on your cartridges. Sometimes pins get bent or the user forgets to remove the protective tapes from the pins. Remove all the tapes and clips from your cartridge from the printer and then reinstall the cartridge from the printer. On your PC, give the print command and then check for the error.
Inspect for the paper jam
Paper jam is one of the potential reasons behind the B200 error code. Paper jam mostly appears when the user hasn’t aligned the pages on the input tray. While printing, the paper gets tear-up and stuck inside the printer. The paper chunk inside the printer starts showing the error. When you get the printer error, check for the paper jam. Open your Canon printer and remove all the paper chunks immediately. Take a clean cloth and remove all the dust from the printer. Now close the access door of your printer and try to take a printout.
Check Canon printhead
When a user takes too many printouts simultaneously, the printhead may get overheated and starts showing the error. You need to stop the printing process until the printhead cools down. Otherwise, the printhead may get completely burned out. Wait for about 10-15 minutes and then check for the error. Don’t forget to check whether the printhead is cleaned or not. The printhead can get clogged with ink if not cleaned timely.
You can clean the printhead of your Canon device either manually or by using the utility tool. You can follow the given steps to use the Canon printer utility tool:
- Turn on your Canon printer
- Go to printer properties dialog box
- Select the Maintenance tab
- Choose the Deep Cleaning option
Now click on the ink group and hit the Execute button. Check whether the printhead gets completely cleaned. If not, repeat the steps 2-3 times. After cleaning the printhead, try to take a printout from your device.
Check for the ink
If you are using the Canon printer after a long time then the ink on the cartridge may get dried up. Open the access door of the Canon printer and take out the cartridge. Check the link on the ink drums. If the ink gets dried up then you have to mix some liquid solvent on it. Shake the ink drum and close the lid tightly. Reinstall the cartridge on your printer and then check for the error code. You should also check the printer driver.
When a new update is available for your Canon driver; install the update immediately. If you are unable to troubleshoot your Canon related error then you should ask the Canon technical team for help.